UNIDENTIFIED

MIO/16 CARD

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                     Function                            Location

  40-pin IDE(AT) Interface connector                       CN1

  34-pin control cable connection - floppy drive           CN2

  16-pin game port - internal                              CN3

  10-pin serial port 2 - internal                          CN4

  10-pin serial port 1 - external                          CN5

  25-pin parallel port (LPT1/2) - external                 CN6

                        USER CONFIGURABLE SETTINGS

               Function                     Location          Setting

      Factory Configured - do not             JP1                -
      alter

  »   IRQ14 without active control            JP2            pins 2 & 3
      output                                                  closed

      IRQ14 with active control               JP2            pins 1 & 2
      output                                                  closed

  »   Parallel port set to LPT2               JP3            pins 2 & 3
                                                              closed

      Parallel port set to LPT3               JP3            pins 1 & 2
                                                              closed

  »   Serial port 1 set to COM1,              JP4            pins 2 & 3
      Serial port 2 set to COM2                               closed

      Serial port 1 set to COM3,              JP4            pins 1 & 2
      Serial port 2 set to COM4                               closed

  »   Hard drive enabled                      JP5            pins 2 & 3
                                                              closed

      Hard drive disabled                     JP5            pins 1 & 2
                                                              closed

  »   Serial port 1 set to IRQ4               JP6             closed

  »   Serial port 2 set to IRQ3               JP6A            closed

  »   Parallel port interrupt is IRQ7         JP7            pins 2 & 3
                                                              closed

      Parallel port interrupt is IRQ5         JP7            pins 1 & 2
                                                              closed

                  MISCELLANEOUS TECHNICAL NOTES

  The alternative Serial Port IRQ’s (JP6 and JP6A) are unknown